 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| COMMUNICATIONS COMPONENTS Miniature Integrated Power Monitor Key Features * High reliability * Compact footprint with ultra-wide bandwidth * Extremely low wavelength dependent loss (WDL) and PDL * Up to 10-channel arrays Applications * EDFA * Raman amplifiers * Add/Drop monitoring * DWDM systems JDSU miniature integrated power monitors are designed for channel monitoring in dense wavelength division multiplexing (DWDM) systems and Add/Drop modules. They can also be used for signal/pump power monitoring in erbium doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions tend to replace traditional fused fiber tap + photodiodes. The miniaturized version is a high performance active hybrid device that incorporates a micro-optic tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It offers high reliability, compact footprint with ultra-wide bandwidth, and very low polarization dependent loss (PDL). NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com MINIATURE INTEGRATED POWER MONITOR 2 IPM Single Unit Diagram (Specifications in mm unless otherwise noted.) 20.1 MAX 18.35 7.0 MAX O 3.20 0.50 X 0.50 O 0.50 PITCH 2.54 IPM Array (6 to 8 channels) Diagram (Specifications in mm unless otherwise noted.) 32.00 3.20 PITCH 2.54 X 11 =27.94 3.0 O 0.51 O 1.14 PIN 1 27.94 32.50 22.86 6.00 IPM Array Pinout (8 channel only) BOTTOM VIEW Pin 1 2 3 4 5 6 7 8 9 10 11 12 Description Anode (Common) Cathode 1 Cathode 2 Anode (Common) Cathode 3 Cathode 4 Cathode 5 Anode (Common) Cathode 6 Cathode 7 Anode (Common) Cathode 8 MINIATURE INTEGRATED POWER MONITOR 3 Specifications Parameter Wavelength range C-Band L-Band C+L Band Insertion loss (input to output) Wavelength flatness (input to output) Polarization dependent loss (input to output) PMD (input to output) Optical return loss PD operating bias voltage, VR PD responsivity PD linearity PD dark current PD cut-off frequency Input optical power Operating temperature Storage temperature Tensile load Package dimensions Single unit 6 to 8 channels array 10 channels array Fiber type Pigtail color code Specification Maximum Maximum Maximum Maximum Minimum Minimum Maximum Maximum Maximum 1510-1580 nm 1560-1625 nm 1510-1625 nm See table below 0.002 dB/nm 0.03 dB 0.1 ps 45 dB -5 V (typical) 0.8 A/W (for net responsivity, see table below) 10% 1 nA @ VR = -5 V and 23 C 600 MHz @ VR = -5 V and RL = 50 W See table below -20 to 75 C -40 to 85 C 5N 3.2 mm x 18.5 mm 32 mm x 32.5 mm x 6 mm 38.8 mm x 32.5 mm x 6 mm SMF-28, 250 m primary coating Black (input port); Clear (output port) Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated. Tap Ratio and Insertion Loss Table Code Tap Ratio Maximum Insertion Loss (Input to Output) 0.5 dB 0.5 dB 0.5 dB 0.5 dB 0.6 dB 0.8 dB Minimum Net Responsivity1 Maximum Optical Power2 1 2 3 4 5 T 1% 2% 3% 4% 5% 10% 0.008 A/W 0.016 A/W 0.024 A/W 0.032 A/W 0.040 A/W 0.080 A/W 500 mW 250 mW 150 mW 125 mW 100 mW 50 mW 1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber. 2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified. MINIATURE INTEGRATED POWER MONITOR Ordering Information For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com. Sample: IPM-C82310010 IPMCode C L 1 Wavelength C-band L-band C + L bands Code 1 2 3 4 5 T Tap Ratio 1% 2% 3% 4% 5% 10% Code 2 3 4 Package Size Single unit 6-8 channel array 10-channel array 001 Code 0 1 2 3 4 5 8 9 A B C Connector Type No connector FC/PC FC/SPC FC/APC SC/SPC SC/APC ST FC/UPC SC/UPC LC/SPC LC/UPC Code 1 6 7 8 T Channels Single device 6-channel array 7-channel array 8-channel array 10-channel array Code 1 2 4 5 Fiber Length 1m 2m 0.5 m 1.5 m SMF-28 is a registered trademark of Corning Incorporated. ST is a registered trademark of Lucent Technologies. All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. (c)2007 JDS Uniphase Corporation. All rights reserved. 21029449 Rev. 001 10/05 MINIIPM.DS.CC.AE NORTH AMERICA: 800 498-JDSU (5378) WORLDWIDE: +800 5378-JDSU WEBSITE: www.jdsu.com Reviewed February 2007 |
Price & Availability of IPM-1T43
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |